Bike Service · MTB Evolution
Hydraulic Brake Service
Hydraulic brake service at the MTB Evolution workshop in East Sarajevo: brake bleeding, brake fluid replacement, checks of pads, rotors and hoses, and caliper centering. For MTB and road bikes.
Mon–Sat
8:00 AM – 7:00 PM
from 20 KM
labor price per brake
1× a year
brake fluid replacement
Overview
What does hydraulic brake service include?
A hydraulic brake service restores full braking performance and gets rid of that “spongy” feel. Here is everything we do, with each part explained in detail below.
01
System bleeding
02
Brake fluid replacement
03
Pad check
04
Rotor inspection
05
Calipers and pistons
06
Hoses and levers
Quick check
Quick bike brake check
Tick the items you can confirm on your bike. This bike brake check is only a rough guide. The final assessment comes from an inspection in the workshop.
Confirmed 0 of 5
Check the items you can confirm
This quick bike brake check is only a guide and doesn't replace an inspection in the workshop.
01
Brake bleeding
Bleeding is done when the lever turns “spongy”. Air trapped in the system is the most common cause, and brake bleeding removes it and restores full braking power. Read more in our guide on how to bleed Shimano brakes.
Bleeding
02
Brake fluid replacement
The old brake fluid (DOT or mineral oil) is replaced with fresh fluid. We recommend changing it once a year, since DOT fluid absorbs moisture and its properties degrade over time.
Fluid
Don’t mix fluid types
Use only the fluid recommended by your brake manufacturer. Mixing fluid types can permanently damage the brake system.
03
Pad check
We check the thickness and condition of the brake pads and replace them if needed.
Pads
Warning
Don’t put off the service. Brakes that feel “spongy” or grab weakly put your safety directly at risk.
04
Rotor inspection
We inspect brake rotors for damage and warping. For squealing and centering, read our guide to bike disc brakes, which covers disc brake maintenance.
Rotors
05
Caliper centering and piston cleaning
Calipers are centered relative to the rotor, which eliminates rubbing, and the pistons are cleaned. Park Tool also offers technical brake maintenance guides.
Calipers
06
Hoses and levers
Hoses are checked for leaks and damage, and on the levers we fine-tune the reach and the engagement point.
Wrap-up
Book a service →
Price
Hydraulic brake service price
The price depends on the scope of work.
from 20 KM
Labor price per brake
Labor starts at 20 KM per brake, and the final amount depends on the scope of work. Fluid, pads and other parts are not included in the labor price.
1× a year
Brake fluid replacement
We recommend replacing the fluid once a year, especially with DOT fluid, which absorbs moisture.
In extreme temperatures, brake fluid loses its properties. Service is advisable before the season and as soon as you notice a change in how your brakes work. Brake adjustment is also part of the basic bike service.
Services
Other service options
If your bike needs more than a brake service, pick the right service or check the bike service price list.
Minor (basic) service
Derailleur and brake adjustment, chain, wheels, tire pressure and a quick frame inspection.
Learn more →
Major service
Complete disassembly, cleaning, replacement of wear parts, wheel truing and bearing checks.
Learn more →
Bike service process
From the first call to pickup: six steps and a price estimate before any work begins.
Learn more →
E-bike diagnostics
Bosch Diagnostic Tool 3 and Shimano E-Tube Professional: error code reading, software updates, battery health.
Learn more →
Washing and detailing
Hand wash, drivetrain cleaning, lubrication and a protective frame coating.
Learn more →
Wheel service
Wheel truing, tire replacement and bearing service.
Learn more →
Suspension service
Fork and shock service, oil replacement and setup.
Learn more →
Tubeless system
Tubeless installation and switching to riding without inner tubes.
Learn more →
Price list
The prices of all services in one place, so you know what to expect up front.
See prices →
FAQ
Frequently asked questions about brake service
How often should you change the fluid in hydraulic brakes?
We recommend changing the fluid once a year, especially if you use DOT fluid, which is hygroscopic (absorbs moisture).
Can hydraulic brakes be serviced in summer and winter?
Yes. In extreme temperatures, brake fluid loses its properties. A hydraulic brake service is advisable before the season and whenever you notice changes in how your brakes work.
What causes a “spongy” brake feel?
It is most often a sign of air trapped in the system, or of old brake fluid contaminated with moisture. It calls for brake bleeding.
How much does hydraulic brake service cost?
Labor starts at 20 KM per brake, and the final amount depends on the scope of work. Fluid, pads and other parts are not included in the labor price.
Do I need to book an appointment?
We recommend it. You can book by phone (+387 66 902 418), Viber, WhatsApp or through the booking form.
Can I mix different fluids in my brakes?
No. Use only the fluid recommended by your brake manufacturer. Mixing fluid types can permanently damage the brake system.
Do you service brakes on MTB and road bikes?
Yes. We do hydraulic brake service on MTB and road bikes, with both DOT and mineral oil.
Get your full braking power back
Book a hydraulic brake service in East Sarajevo and ride safely on the trail and the road. The service is led by Marko Ristivojević, Bosch eBike Expert and Master Bike Mechanic. The workshop is rated 5.0 on Google (103 reviews).
Bike service East Sarajevo: Riste Anđića 20, 71123 East Sarajevo · Mon–Sat 8:00 AM–7:00 PM · Closed on Sundays
