Bike Service · MTB Evolution
Bike Wheel Service and Truing
Bike wheel truing and full bike wheel service at the MTB Evolution workshop in East Sarajevo: rim truing, spoke tension checks, hub and bearing service, tire replacement.
Mon–Sat
8:00 – 19:00
35 KM
labor per wheel
30–45 min
truing one wheel
Overview
What does bike wheel service and truing include?
Bike wheel service gives you a straight, strong wheel that spins freely. Below is every part of the service in detail.
01
Rim truing
02
Spoke tension
03
Hub service
04
Sealed cartridge bearings
05
Tire replacement
06
New wheels
01
Bike wheel truing and rim leveling
On a professional truing stand, we remove lateral (wobble) and vertical (hop) deviations. A properly trued wheel is key to strength and durability, reduces the risk of broken spokes and improves power transfer.
Truing
Spoke tension is measured
Uneven spoke tension is a common cause of repeated spoke breakage and a rim that goes out of true faster. That's why we always measure tension.
02
Spoke tension and bike spoke repair
During bike wheel service, spoke tension is checked and evened out with a tension meter. Broken spokes and nipples are replaced as part of bike spoke repair.
Spokes
03
Wheel hub service
Hub service directly affects how freely the wheel spins. We visually inspect hubs and axles, and on traditional cup-and-cone hubs we adjust the cones, replace the ball bearings and re-grease. We recommend servicing traditional bearings once a year.
Wheel hub
04
Sealed bearing replacement
Sealed cartridge bearings can't be adjusted, only replaced. The old bearing is pressed out and the new one is installed with specialized presses.
Bearings
Bearing feels rough or has play
As soon as a bearing feels rough or has play, it should be replaced. Sealed cartridge bearings need no maintenance, only replacement.
05
Tire replacement and pressure check
As part of MTB wheel repair and service, we replace inner tubes, valves and rim tape, mount and remove tires, and set the pressure according to the manufacturer's recommendations and your terrain. If you want to ride without inner tubes, check out the tubeless system.
Tires
06
Fine-tuning new wheels
Manufacturers often don't pay enough attention to even spoke tension, so we recommend fine-tuning new wheels too. This prevents them from going out of true early.
New wheels
Book a service →
Price
Bike wheel service price
Bike wheel service costs 20 KM per wheel. Parts (bearings, spokes, nipples, tires) are not included in the labor price.
35 KM
Labor per wheel
Labor price for wheel service. For more complex hub service, you get a quote after diagnostics.
30–45 min
Wheel truing
Truing one wheel takes about 30 to 45 minutes. With serious rim damage or several broken spokes, it can take up to a few hours.
Parts are charged separately, and you get a quote before any work begins. If your bike needs more, take a look at the full bike overhaul.
Services
Other workshop services
If your bike needs more than wheel service, pick the right service or check the bike service price list.
Basic service
Derailleur and brake adjustment, chain, wheels, tire pressure and a quick frame inspection.
Learn more →
Full overhaul
Complete teardown, cleaning, replacement of wear parts, wheel truing and bearing checks.
Learn more →
Bike service process
From the first call to pickup: six steps and a price estimate before any work.
Learn more →
E-bike diagnostics
Bosch Diagnostic Tool 3 and Shimano E-Tube Professional: error code reading, software updates, battery health.
Learn more →
Washing and detailing
Hand wash, drivetrain cleaning, lubrication and protective frame coating.
Learn more →
Suspension service
Fork and shock service, oil change and setup.
Learn more →
Hydraulic brakes
Bleeding, brake fluid replacement, pad and rotor checks.
Learn more →
Tubeless system
Tubeless setup and switching to riding without inner tubes.
Learn more →
Price list
All service prices in one place, so you know what to expect in advance.
See prices →
FAQ
Frequently asked questions about wheel service
How long does bike wheel truing take as part of bike wheel service?
Truing a wheel, whether it has a rim brake or a disc brake, takes about 30 to 45 minutes per wheel. With serious rim damage or several broken spokes, it can take up to a few hours, and we do our best to finish the same day.
Is truing needed on new wheels too?
It's recommended. Manufacturers often don't pay enough attention to even spoke tension, so fine-tuning ensures the wheel's durability and stability from the very first ride.
How often should hub bearings be serviced?
Hubs with traditional bearings should be disassembled, cleaned and re-greased once a year. Sealed cartridge bearings need no maintenance, only replacement when play or rough rotation appears.
Do you service wheels with sealed cartridge bearings?
Yes. With sealed bearings we don't adjust, we replace: we press out the old bearing and install a new one using specialized presses.
How much does bike wheel service cost?
Bike wheel service costs 20 KM per wheel. Parts (bearings, spokes, nipples, tires) are charged separately, and for more complex hub service you get a quote after diagnostics.
Do I need to book an appointment?
We recommend it. You can book by phone (+387 66 902 418), Viber, WhatsApp or through the booking form.
Do you replace tires and valves on the wheel?
Yes. As part of bike wheel service, we replace inner tubes, valves and rim tape, mount and remove tires and set the pressure.
Get your wheels back in shape
Book bike wheel service and wheel truing in Sarajevo (East Sarajevo). The workshop is run by Marko Ristivojević, Bosch eBike Expert and Master Bike Mechanic. The service is rated 5.0 on Google (101 reviews).
Bike service East Sarajevo: Riste Anđića 20, 71123 Istočno Sarajevo · Mon–Sat 8:00–19:00 · Closed on Sundays
